Sabre Tech & Modifications

Street-Rod Cool Twin-Plug Three-Valve Cylinder Heads Five-Speed Constant-Mesh Transmission Offset-Dual-Pin-Crankshaft Shaft Final Drive

Chopped Fender

Fender is chopped, bondo applied and sanded, metal is all cleaned. Now is primer/paint time!! I ask around for a paint job and I was quoted $200.00 to prime then black paint with clear coat.


The cost of cutting wheel $7.00 for my dremel tool. I took my time and cut in straight line. It was easy. There is a bracket underneath that must be cut out too.

No roll over on edges, I cut clean and I build up the edge with bondo just a bit.

Be sure to weather (tuff coat) underneath the fender.

If you'd like to add a modification/install/trick or tip? Send pictures/text to:

Disclaimer: Any person who decides to perform any of the above listed modifications, does so at their own risk.
The Sabre Group does not claim any responsibility for damage to your motorcycle or individual.